Codan HF SSB - Page 98

Setup procedures—Part 1
5-30 HF SSB transceiver reference manual
Action Notes
7.
Press
F2
The display shows:
EXIT ENTER
Clone transceiver.
Connect cable and
press F2 to begin
8.
To start the transfer of
information, press
F2
The display shows:
Cloning transceiver.
After about two minutes,
cloning finishes and the master
transceiver beeps twice. The
display shows:
Please remove the
cloning cable to
return to the Setup
Menu.
9.
Disconnect the cable
and switch off both
transceivers.

Setup procedures—Part 1
5-30 HF SSB transceiver reference manual
Action Notes
7.
Press
F2
The display shows:
EXIT ENTER
Clone transceiver.
Connect cable and
press F2 to begin
8.
To start the transfer of
information, press
F2
The display shows:
Cloning transceiver.
After about two minutes,
cloning finishes and the master
transceiver beeps twice. The
display shows:
Please remove the
cloning cable to
return to the Setup
Menu.
9.
Disconnect the cable
and switch off both
transceivers.
