ComAp InteliLite NT AMF26-P - Stand-By Applications; Contactors (Set Point MCB Logic = CLOSE-OFF); ATS with Two Stable Positions (Set Point MCB Logic = CLOSE-ON)

InteliLite
NT
AMF26-P, SW version 2.4, ©ComAp – January 2016 25
AMF26-P-2.4 Reference Guide.pdf
Stand-by Applications
Contactors (set point MCB Logic = “CLOSE-OFF”)
FEEDBACK
+24V(12V)
MCGC
K3
GCB
CLOSE/OPEN
GC
MC
MCB
G~
GCB
MCB
FEEDBACK
CLOSE/OPEN
0V
MC
T
GC
K3
GC
LOAD
MC
K4
K4
ATS with two stable positions (set point MCB Logic = “CLOSE-ON”)
FEEDBACK
+24V(12V)
ATS
K3
GCB
MCB
G~
GCB
T
CLOSE/OPEN
ATS
0V
ATS
LOAD
FEEDBACK
CLOSE/OPEN
MCB
K3