INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 102
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
LLQI(LMQI for
IGMP)
Last Member Query Interval.
The Last Member Query Time is the time value represented by the Last Member Query Interval,
multiplied by the Last Member Query Count.
The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second).
URI Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a
host’s initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second.
Add New IGMP
VLAN
Click to add A new IGMP VLAN. Specify the VID and configure the new entry, then click “Apply”.
The specific IGMP VLAN starts working after the corresponding static VLAN is created.
Apply Click to apply changes.
Reset Click to revert to previous values.
Refresh Click to refresh the table starting from VLAN input fields.
|<< Click to update the table starting from the first entry in the VLAN Table (VLAN ID).
>> Click to update the table starting with the entry after the last entry currently displayed.
To Next Page
Loading...
