Comnet CNGE3FE8MSPOE - Page 75

INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 75
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
TCP URG Specify the TCP “Urgent Pointer field significant” (URG) value for this ACE. 0: TCP frames where the
URG field is set must not be able to match this entry. 1: TCP frames where the URG field is set must
be able to match this entry. Any: Any value is allowed (“don’t-care”).
Ethernet Type Parameters
EtherType
Filter
Specify the Ethernet type filter for this ACE.
Any: No EtherType filter is specified (EtherType filter status is “don’t-care”). Specific: If you want to
filter a specific EtherType filter with this ACE, you can enter a specific EtherType value. A field for
entering an EtherType value appears.
Ethernet Type
Value
When “Specific” is selected for the EtherType filter, you can enter a specific EtherType value. The
allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and 0x86DD(IPv6). A frame
that hits this ACE matches this EtherType value.
Apply Click to apply changes.
Reset Click to revert to previous values.
Cancel Return to the page.