6-2 Minitower Removal and Replacement
6.2 Disassembly Sequence Chart
Use the chart below to determine the disassembly sequence for removing components from the
computer.
6.3 Preparation for Disassembly
6.4.1 Computer Base
6.4.2 Computer Feet
6.5 Cable Lock
6.6 Access Panel
6.7.1 Front Bezel
6.7.2 Power Button
6.7.3 Bezel Blank
6.8.1 Primary 3.5-Inch Hard Drive
6.8.2 5.25-Inch Drive Device
6.8.3 3.25-Inch Drive from a 5.25-Inch Drive Adapter
6.9 Drive Release Latch
6.10.1 Disconnecting and Raising the Expansion Board Cage
6.10.2 Expansion Board
6.10.3 Expansion Board Cage
6.10.4 Riser Board
6.10.5 Expansion Board Cage Guide Bracket
6.10.6 Lift Levers
6.11 Expansion Board Cage Chassis-Mounted Guide Bracket
6.10.7 Fan Assembly
6.12.1 System Board
6.13.1 AGP Graphics Board
6.13.2 Matrox Millennium II Graphics Memory
6.13.3 ATI RAGE PRO Graphics Memory
6.12.2 Microprocessor
6.12.3 Memory
6.12.4 Battery
6.14 Speaker
6.15 Power Supply
6.16.1 Smart Cover Lock Solenoid
6.16.2 Power Switch Cable Assembly
✎
The top cover and drive cage are not to be removed for servicing the computer.
To Next Page
Loading...
