Cubiscan 325 5
CHAPTER 2
SETUP
This chapter provides instructions for assembling and setting up the
Cubiscan 325. Perform the steps to set up the Cubiscan 325 in the
following order:
• Unpacking (page 5)
• Placement (page 7)
• Assembly (page 7)
• Removing the shipping material (page 9)
• Placing the gate (page 9)
• Placing the platform (page 11)
• Attaching the touchscreen (page 12)
• Loosening the gate stop (page 14)
• Connecting power (page 15)
• Turning the Cubiscan 325 on (page 15)
• Connecting to a computer or network (optional) (page 16)
• Installing the Qbit software (optional) (page 22)
• Barcode scanner mount (optional) (page 22)
Unpacking
The Cubiscan 325 is shipped in a crate with all components. The glass
platform is packed in a separate cardboard box inside the crate.
Remove the glass platform from the box and place it in a safe location. The
platform is in a protected cardboard box inside the top of the crate.
Remove the box of accessories packed on the side of the crate.
To Next Page
Loading...