Curtiss-Wright R-NET OMNI2 - Page 6

Curtiss-Wright | PG Drives Technology
SK81935-01
6 | R-net Omni2 Technical Manual | Table Of Contents
4.3 Pin 3 – Joystick Reference ................................. 149
4.4 Pin 5 – Detect .................................................... 149
4.5 Pins 7 and 9 – 12V 100mA ................................. 150
4.6 Pin 8 – Joystick Ground ..................................... 150
5 Digital Signal Levels .................................... 150
5.1 Pins 1, 2, 3 and 4 – Direction ............................. 150
5.2 Pin 6 – Fifth Switch ............................................ 150
5.3 Pin 5 – Detect .................................................... 150
5.4 Pins 7 and 9 – 12V 100mA ................................. 150
5.5 Pin 8 – 0V ........................................................... 150
6 User Switch ................................................ 151
6.1 Signal Levels ...................................................... 151
7 On/Off Switch ............................................ 151
7.1 Signal Levels ...................................................... 151
8 Sip and Puff Input....................................... 151
CHAPTER 10 – NOTES, CAUTIONS AND WARNINGS
SUMMARY ....................................................... 153
1 Introduction ............................................... 153
2 Notes .......................................................... 153
2.1 Introduction ....................................................... 153
2.2 Installing the Omni2 onto a Powerchair ............ 153
2.3 General Care ...................................................... 153
2.4 Sip And Puff Calibration ..................................... 153
2.5 Accessing Powerchair Functions ....................... 154
2.6 General Operating Principles ............................ 154
2.7 Auto Toggle Change .......................................... 154
2.8 Associated Programming ................................... 154
2.9 Speed Adjust Mode ........................................... 154
2.10 Indicator Icons ................................................... 154
2.11 Hazard Icon ........................................................ 154
2.12 Lights Icon.......................................................... 154
2.13 Global – External On/Off Switch Detect ............ 155
2.14 Global – Sleep 12V ............................................. 155
2.15 User Switch Detect ............................................ 155
2.16 9-Way SID Switch Detect ................................... 155
2.17 User Control ...................................................... 155
2.18 Fwd/Rev Auto Toggle ........................................ 155
2.19 Position 1 to Position 16 .................................... 155
2.20 Profile Identifier #.............................................. 156
2.21 Axis Identifier # .................................................. 156
2.22 Position # ........................................................... 156
2.23 User Menu ......................................................... 156
2.24 Learning an IR Code ........................................... 156
2.25 Deleting IR Codes ............................................... 156
2.26 IR Configuration Tool ......................................... 157
2.27 Controller ........................................................... 157
2.28 Insert from Library ............................................. 157
2.29 Libraries ............................................................. 157
2.30 Add Appliance .................................................... 157
2.31 Output ................................................................ 157
2.32 Switch Control Set-Up ........................................ 158
2.33 Forward, Reverse, Left, Right, External Switch 1 &
External Switch 2 Short ...................................... 158
2.34 Forward, Reverse, Left, Right, External Switch 1 &
External Switch 2 Medium ................................. 158
2.35 Forward, Reverse, Left, Right, External Switch 1 &
External Switch 2 Long ....................................... 158
2.36 Medium Nudge Time ......................................... 158
2.37 Long Nudge Time ............................................... 158
2.38 Wireless Security Measures ............................... 158
2.39 User Access ........................................................ 159
3 Cautions ...................................................... 159
3.1 Display / Input Section Connector ..................... 159
3.2 Gradient Test ..................................................... 159
4 Warnings ..................................................... 159
4.1 Introduction ....................................................... 159
4.2 LCD Screen ......................................................... 159
4.3 Assessing the User’s Needs ................................ 160
4.4 Selecting the SID ................................................ 160
4.5 Installing the SID onto a Powerchair .................. 160
4.6 User Switch ........................................................ 160
4.7 D-Type Connector .............................................. 161
4.8 Single Switch Scanner ........................................ 161
4.9 Using the Omni2 without a User Switch ............ 161
4.10 Programming the Omni2 to Suit the User ......... 161
4.11 Program the R-net Driving Characteristics to Suit
the User ............................................................. 161
4.12 General Operating Principles ............................. 161
4.13 Introduction ....................................................... 162
4.14 Global – External On/Off Switch Detect ............ 162
4.15 User Switch ........................................................ 162
4.16 Switch Detect ..................................................... 162
4.17 User Switch Detect............................................. 162