EasyManua.ls Logo

Curtiss-Wright R-NET - Chapter 8 - Ism-8; Introduction; Installation

Curtiss-Wright R-NET
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Curtiss-Wright | PG Drives Technology
SK77981-14
157 | R-net Technical Manual | Chapter 8 ISM-8
CHAPTER 8 ISM-8
1 INTRODUCTION
The R-net Intelligent Seating Module-8 (ISM-8) is an actuator module that offers advancements over the existing R-net ISM. The
ISM-8 allows simultaneous channel operation with independent direction control.
2 INSTALLATION
An ISM-8 can be fitted at any point within a R-net Control System. See following diagram.
CAUTION:
It is possible to set up a Control System so that it is unsuitable for some users or even some vehicles. For all of the above
reasons it is important that you contact Curtiss-Wright if you have the slightest doubts or if you need any advice on
programming.
WARNING:
Programming and diagnostics should only be conducted by healthcare professionals with in-depth knowledge of Curtiss-
Wright electronic Control Systems. Incorrect programming could result in an unsafe setup of a vehicle for a user. Curtiss-
Wright accept no liability for any losses of any kind if the programming of the Control System is altered from the factory-
preset values.

Table of Contents

Related product manuals