2.3 MAKING AN ADJUSTMENT
Once the parameter for adjustment has been selected, the Speed buttons can be used to make adjustments.
NOTE:
To ensure all new values are stored correctly, exit OBP mode with a series of left hand joystick deflections.
3 PC PROGRAMMER - OEM PARAMETER LIST (* DENOTES PRESENT IN OBP)
Profile Management
Profile Name Sets the Profile Name
*Profile Enable Sets if a Profile is available
*Mode Enable Sets which Modes are available in specific Profiles
*Input Device Type Sets which Input Device is active within a Profile
Input Device Subtype Sets which Input Device Subtype is active within a Profile
Seat Reversal Profile Sets which Profiles relate to each configuration
Allow Grab Sets which Input Device can grab focus.
Configuration
Mode Name Sets the Mode Name
Input Sets the data the Input Device transmits to the Output Device
Output Sets which Output Device is active for a specific Mode
Speeds
*Maximum Forward Speed Sets maximum forward speed
*Minimum Forward Speed Sets minimum forward speed
*Maximum Reverse Speed Sets maximum reverse speed
*Minimum Reverse Speed Sets minimum reverse speed
*Maximum Turn Speed Sets maximum turning speed
*Minimum Turn Speed Sets minimum turning speed
*Maximum Forward Acceleration Sets maximum forward acceleration
*Minimum Forward Acceleration Sets minimum forward acceleration
*Maximum Forward Deceleration Sets maximum forward deceleration
*Minimum Forward Deceleration Sets minimum forward deceleration
*Maximum Reverse Acceleration Sets maximum reverse acceleration
*Minimum Reverse Acceleration Sets minimum reverse acceleration
*Maximum Reverse Deceleration Sets maximum reverse deceleration
*Minimum Reverse Deceleration Sets minimum reverse deceleration
*Maximum Turn Acceleration Sets maximum turning acceleration
*Minimum Turn Acceleration Sets minimum turning acceleration
*Maximum Turn Deceleration Sets maximum turning deceleration
*Minimum Turn Deceleration Sets minimum turning deceleration
*Power Reduces power to minimize risk of indoor fittings damage
*Torque Torque boost to overcome obstacles at low speed settings
*Tremor Damping Adjustable damping to reduce the effect of hand tremor
Fast Brake Rate Sets the Fast Brake Rate
Controls
Global Controls
*Momentary Screens Enabled Sets whether the momentary screens are enabled
*Change Profile while Driving Sets if it is possible to change between profiles whilst driving
*Change Speed while Driving Sets if the speed buttons are active whilst driving
*Speed Adjust Sets if the Joystick speed buttons are active
Profile Button Sets the functionality of the profile button
To Next Page
Loading...
Need help?
General
