6 LCD SCREEN - COLOR
This section covers those Joystick Modules that are fitted with a color LCD screen.
The color LCD screen is split into 3 areas of information. The Top Bar, the Base Bar and the Main Screen Area.
Each area is covered separately within this secti on.
6.1 TOP BAR
6.1.1 BATTERY INDICATOR
This displays the charge available in the battery and can be used to alert the user to the status of
the battery.
Steady: This indicates that all is well.
Flashing Slowly: The control system is functioning correctly, but you should charge the battery as soon as possible.
Stepping Up: The wheelchair batteries are being charged. You will not be able to drive the wheelchair until the charger is
disconnected and you have switched the control system off and on again.
Refer to section 12 for a description of how to read the Battery Gauge.
6.1.2 FOCUS
When the control system contains more than one method of direct control, such as a secondary
Joystick Module or a Dual Attendant Module, then the Module that has control of the wheelchair
will display the In Focus symbol.
6.2 BASE BAR
6.2.1 CURRENT PROFILE
The currently selected Profile is shown in numeric form.
To Next Page
Loading...
Need help?
General
