Curtiss-Wright R-NET User Manual

Curtiss-Wright | PG Drives Technology
SK77981-14
22 | R-net Technical Manual | Chapter 1 - Operation
To unlock the wheelchair;
 If the control system has switched off, press the On/Off button.
 Insert and remove a Curtiss-Wright supplied key into the Charger Socket on the Joystick Module. A short beep will be
heard.
 The wheelchair is now unlocked.
5.5 ACTUATOR SELECTION SCREEN
To adjust the seat position the actuator screen must be visible.
Depress the Mode Button to scroll through the Mode screens until you reach the actuator screen, displayed b elow.
Actuator adjustment is achieved as follows.
 Move the Joystick sideways to select the desired axis.
(This is indicated by the section of the wheelchair that is highlighted)
 Move the joystick forwards and backwards to move the actuator.
 Repeat these steps for each actuator that requires adjustment.
To drive again depress the Mode button until the Drive screen is reached or, in the case of the LED joystick module, until th e
Speed Indicator returns to its normal state.

Curtiss-Wright R-NET Specifications

General

Brand	Curtiss-Wright
Model	R-NET
Category	Wheelchair
Language	English