D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 139
Section 7 - VPN
Auto Connect
Enabling this eld allows user to enter time Interval at which device should try connecting to the server.
Note: You can also Connect or Disconnect to the server on the following page by right clicking the Connection
Status: Status > Network Information > Active VPNs > OpenVPN Connections.
Interval Time Interval at which device should try connecting to the server. It ranges from 1 minute to 60 minutes.
User Based Auth
This option is introduced to provide the additional authentication method using username/password.
Disabled by default.
Username Enter a username. This eld is available only when User Based Auth is enabled.
Password Enter a password. This eld is available only when User Based Auth is enabled.
Certicate Verication This method enables tunnel authentication to be with certicates. Enabled by default.
Certs Prole
Select the prole which has list certicates uploaded for the congured mode server/client. By default the
default prole will be selected which has both server and client certicates.
TLS Authentication Key
Enabling this adds Tls authentication which adds an additional layer of authentication. Can be checked
only when the tls key is uploaded. Disabled by default.
TLS Key Select the type of tls certicate name.
Save Click Save to save and activate your settings.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English