D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 119
Section 7 - VPN
One To One Mapping
Path: VPN > IPSec VPN > One To One Mapping
This page shows a list of congured IPsec One To One Mapping. A user can add, edit, and delete IPsec One To One
Mapping on this page. To upload an exported IPSec VPN policy, follow the steps given below:
1. Click VPN > IPSec VPN > One To One Mapping.
2. IPsec One to One Mapping list is displayed. The table lists the available One to One Mapping rules that
have been congured.
3. The elds present on this page are given in the table below.
Field Description
Source IP Range Start It displays the starting IP address in the private (LAN) IP subnet.
Mapped IP Range Start
It displays Mapped IP address through which trac should be forwarded/received from/to the LAN host
IP or range of IP addresses.
Range Length
It displays Range value between 1 to 254, which maps One To One private address to public address up
to given range.
IPSec Policy Name It displays the name of the IPSec policy associated with the congured One To One mapping rule.
4. To add a new entry into the table, click Add New One to One Mapping to open the One to One
Mapping Conguration page.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English