D-Link DSR-Series User Manual 229
Section 9 - Maintenance
Path: Maintenance > Management > Power Saving
The router allows you to adjust the power consumption of the hardware based on your actual usage. The two
āgreenā options available for your LAN switch are Power Saving by Link Status and Length Detection State.
1. Click Maintenance > Management > Power Saving.
Power Saving
Field Description
By Link Status
With āPower Saving by Link Statusā option toggled to ON, the total power consumption by the LAN
switch is dependent function of on the number of connected ports. The overall current draw when
a single port is connected is less than when all the ports are connected.
By Cable Length Detection
With āLength Detection Stateā option toggled to ON, the overall current supplied to a LAN port is
reduced when a smaller cable length is connected on a LAN port.
Save Click to save and activate your settings.
2. Complete the īelds from the table below and click Save.