D-Link DSR-Series User Manual 18
Section 4 - LAN Conīguration
Field Description
IP Address Enter an new IP address for the router. Default is 192.168.10.1.
Subnet Mask Enter the subnet mask for your network. Default is 255.255.255.0.
DHCP Mode
Select one of the following modes:
⢠None - Turns oī DHCP.
⢠DHCP Server (default) - The router will act as the DHCP server on your network.
⢠DHCP Relay - DHCP clients on your network will receive IP address leases from a DHCP server on a
diīerent subnet.
LAN Settings
Path: Network > LAN > LAN Settings
To conīgure the LAN settings on the router:
1. Click Network > LAN > LAN Settings.
2. Complete the īelds in the table below and click Save.