D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 222
Section 9 - Maintenance
Path: Maintenance > Management > SNMP > Access Control List
The page lists all the IP addresses of SNMP agents to which the router allows several operations. To edit, delete,
or create a new access control entry:
1. Click Maintenance > Management > SNMP > Access Control List tab.
Access Control
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add Access Control.
3. Complete the elds from the table below and click Save.
Field Description
IP Address Enter the IP Address of the SNMP agent.
Subnet Mask Enter the network mask used to determine the list of allowed SNMP managers.
Community
Enter the community string to which the agent belongs. Most agents are congured to listen for
traps in the Public community.
Access Type Select Access Type. It will be either read only (ROcommunity) or read-write (RWcommunity).
Save Click Save to activate your settings.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English