D-Link DSR-Series User Manual 58
Section 5 - Connect to the Internet
Traīc Management
Path: Network > Internet > Traīc Management > Bandwidth Proīles
Bandwidth proīles allow you to regulate the traīc īow from the LAN to WAN 1 or WAN 2. This is useful to ensure
that low priority LAN users (like guests or HTTP service) do not monopolize the available WANās bandwidth for
cost-savings or bandwidth-priority-allocation purposes.
Bandwidth proīles conīguration consists of enabling the bandwidth control feature from the GUI and adding
a proīle which deīnes the control parameters. The proīle can then be associated with a traīc selector, so that
bandwidth proīle can be applied to the traīc matching the selectors. Selectors are elements like IP addresses
or services that would trigger the conīgured bandwidth regulation.
To edit, delete, or create a new bandwidth proīle:
1. Click Network > Internet > Traīc Management > Bandwidth Proīles.
2. Toggle Enable Bandwidth Proīles to ON and click Save.
Bandwidth Proīles
3. Click Add New Bandwidth Proīle.