D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 75
Section 5 - Connect to the Internet
IPv6
IP Mode
Path: Network > IPv6 > IP Mode
This page allows you to congure the IP protocol version to be used on the router. In order to support IPv6 on
your local network (LAN), you must set the router to be in IPv4 / IPv6 mode. This mode will allow IPv4 nodes to
communicate with IPv6 devices through this router.
To enable IPv6 on the router:
1. Click Network > IPv6 > IP Mode.
2. Select either IPv4 or IPv4 & IPv6. It will work for all the VLANs congured on the VLAN Settings page
(Network > VLAN > VLAN Settings).
3. Click Save.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English