D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 19
Section 4 - LAN Conguration
DHCP Server
Field Description
DHCP Mode Select DHCP Server from the drop-down menu.
Starting IP Address
Enter the starting IP address in the DHCP address pool. Any new DHCP client joining the LAN is assigned
an IP address within the starting and ending IP address range. Starting and ending IP addresses must
be in the same IP address subnet as the router’s LAN IP address.
Ending IP Address Enter the ending IP address in the DHCP address pool.
Default Gateway
Enter the default gateway IP address you want to assign to your DHCP clients. This IP is usually the
router’s LAN IP address (default is 192.168.10.1).
Domain Name Enter a domain name.
Lease Time Enter the time, in hours, for which IP addresses are leased to clients.
Congure DNS/WINS
Toggle to On to manually enter DNS and/or WINS server IP address(es). If set to O, your router’s LAN
IP address will be assigned the DNS server to your clients and the router will get the DNS information
from your ISP.
Primary DNS Server Enter the primary DNS Server IP address.
Secondary DNS Server Enter the secondary DNS Server IP address.
WINS Server Enter the IP address of a WINS server (Optional).
Save Click Save at the bottom to save and activate your settings.
2. Complete the elds in the table below and click Save.
1. Select DHCP Server from the drop-down menu.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English