D-Link DSR-Series User Manual v
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static
electricity from your body before you touch any of the electronic components, such as the microprocessor. You can
do so by periodically touching an unpainted metal surface on the chassis.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the anti-static packing material until you are ready to install the component
in your system. Just before unwrapping the anti-static packaging, be sure to discharge static
electricity from your body.
2. When transporting a sensitive component, īrst place it in an anti-static container or package.
3. Handle all sensitive components in a static-safe area. If possible, use anti-static īoor pads,
workbench pads and an anti-static grounding strap.
Protecting Against Electrostatic Discharge
Preface
To Next Page
Loading...
Need help?
General
