D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 337
Appendix D - Log Output Reference
Radar found on channel %d (%d MHz), DEBUG %03d:, i ERROR
End of DFS wait period DEBUG %02x, ((unsigned char *)p)[i] ERROR
%s error allocating beacon, __func__ DEBUG mic check failed ERROR
failed to allocate UAPSD QoS NULL tx descriptors:
%d, error
DEBUG [%s] Wrong parameters, __func__ ERROR
failed to allocate UAPSD QoS NULL wbuf DEBUG [%s] Wrong Key length, __func__ ERROR
%s: unable to allocate channel table, __func__ DEBUG [%s] Wrong parameters, __func__ ERROR
%s: unable to update h/w beacon queue
parameters,
DEBUG [%s] Wrong Key length, __func__ ERROR
ALREADY ACTIVATED DEBUG [%s] Wrong parameters, __func__ ERROR
%s: missed %u consecutive beacons, DEBUG [%s] Wrong Key length, __func__ ERROR
%s: busy times: rx_clear=%d, rx_frame=%d, tx_
frame=%d, __func__, rx_clear, rx_frame, tx_frame
DEBUG [%s] Wrong parameters, __func__ ERROR
%s: unable to obtain busy times, __func__ DEBUG [%s] Wrong Key length, __func__ ERROR
%s: beacon is ocially stuck, DEBUG [%s]: Wrong parameters, __func__ ERROR
Busy environment detected DEBUG
[%s] Wrong Key Length %d, __func__,
des_key_len
ERROR
Inteference detected DEBUG
[%s] Wrong parameters %d, __func__,
des_key_len
ERROR
rx_clear=%d, rx_frame=%d, tx_frame=%d, DEBUG
[%s] Wrong Key Length %d, __func__,
des_key_len
ERROR
%s: resume beacon xmit after %u misses, DEBUG [%s] Wrong parameters, __func__ ERROR
%s: stuck beacon; resetting (bmiss count %u), DEBUG [%s] Wrong Key Length, __func__ ERROR
EMPTY QUEUE DEBUG [%s] Wrong parameters, __func__ ERROR
SWRInfo: seqno %d isswRetry %d retryCnt %d,wh
? (*(u_int16_t *)&wh->i_seq[0]) >> 4 : 0, bf->bf_
isswretry,bf->bf_swretries
DEBUG [%s] Wrong Key Length, __func__ ERROR
Buer #%08X --> Next#%08X Prev#%08X
Last#%08X,bf, TAILQ_NEXT(bf,bf_list),
DEBUG [%s] Wrong parameters, __func__ ERROR
Stas#%08X ag#%08X Node#%08X,
bf->bf_status, bf->bf_ags, bf->bf_node
DEBUG [%s] Wrong parameters, __func__ ERROR
Descr #%08X --> Next#%08X Data#%08X
Ctl0#%08X Ctl1#%08X, bf->bf_daddr, ds->ds_
link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1
DEBUG [%s] Wrong parameters, __func__ ERROR
Ctl2#%08X Ctl3#%08X Sta0#%08X
Sta1#%08X,ds->ds_hw[0], ds->ds_hw[1], lastds-
>ds_hw[2], lastds->ds_hw[3]
DEBUG [%s] Wrong parameters, __func__ ERROR
Error entering wow mode DEBUG
device name=%s not found, pReq-
>ifName
ERROR
Wakingup due to wow signal DEBUG unable to register KIFDEV to UMI ERROR
%s, wowStatus = 0x%x, __func__, wowStatus DEBUG
ERROR: %s: Timeout at page %#0x
addr %#0x
ERROR

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English