xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
138
Figure 4-81 ERPS Settings window
The fields that can be configured are described below:
Parameter Description
ERPS State
Click the radio buttons to enable or disable the ERPS State. The default is Disabled.
ERPS Log
Click the radio buttons to enable or disable the ERPS Log. The default is Disabled.
ERPS Trap
Click the radio buttons to enable or disable the ERPS Trap. The default is Disabled.
R-APS VLAN
Specify the VLAN which will be the R-APS VLAN.
Click the Apply button to accept the changes made for each individual section.
Click the Find button search the entered R-APS VLAN information.
Click the View All button to see all the entries.
Click the Delete button to remove the specific entry.
Click the Detail Information link to see ERPS information.
Click the Sub-Ring Information link to see more detailed information.
After clicking the Detail Information link, the following page will appear:
Figure 4-82 ERPS Settings - Detail Information window
To Next Page
Loading...
