xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
148
Figure 4-95 LLDP Remote Port Information – Show Normal window
Click the <<Back button to return to the previous page.
LLDP-MED
LLDP-MED (Media-Endpoint-Discovery) extends the LLDP industry standard to support advanced features on the
network edges with specialized capabilities and LLDP-MED standards-based functionality.
LLDP-MED System Settings
On this page the user can configure the fast start repeat count.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED System Settings, as shown
below:
Figure 4–96 LLDP-MED System Settings Window
The fields that can be configured are described below:
Parameter Description
LLDP-MED Log State
Here the user can enable or disable the LLDP-MED Log State.
Fast Start Repeat
Count
The repeat count range is from 1 to 10. The default value is 4.
Click the Apply button to accept the changes made for each individual section.
LLDP-MED Port Settings
On this page the user can enable or disable transmit LLDP-MED TLVs. Setting non-supported capability shall have
no functional effect and will result in an inconsistent value error returned to the management application. It
effectively disables LLDP-MED on a per-port basis by disabling transmission of capabilities TLV. In this case the
remote table’s objects in the LLDP-MED MIB corresponding to the respective port will not be populated.
To Next Page
Loading...
