xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
298
Time Zone Settings
Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings, as shown below:
Figure 9-23 Time Zone Settings window
The fields that can be configured are described below:
Parameter Description
Daylight Saving Time
State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving Time
Offset In Minutes
Use this pull-down menu to specify the amount of time that will constitute your local
DST offset – 30, 60, 90, or 120 minutes.
Time Zone Offset From
GMT In +/- HH:MM
Use these pull-down menus to specify your local time zone’s offset from Greenwich
Mean Time (GMT.)
Parameter Description
DST Repeating Settings
Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For
example, specify to begin DST on Saturday during the second week of April and end
DST on Sunday during the last week of October.
To Next Page
Loading...
Need help?
General