D-Link xStack DES-3528 Series Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
292
Figure 9-14 DHCP Server Dynamic Binding window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the name of the DHCP pool.
Click the Clear button to remove the specific entry based on the information entered.
Click the Clear All button to remove all the entries.
DHCP Conflict IP
To view this window, click Network Application > DHCP > DHCP Server > DHCP Conflict IP, as shown below:
Figure 9-15 DHCP Conflict IP window
Click the Clear All button to remove all the entries.
DHCPv6 Relay
DHCPv6 Relay Global Settings
This window is used to configure DHCPv6 relay global settings.
To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as
shown below:
Figure 9-16 DHCPv6 Relay Global Settings window
The fields that can be configured are described below:
Parameter Description
DHCPv6 Relay State
Click the radio buttons to enable or disable the DHCPv6 Relay service on the Switch.
The default is Disabled.
DHCPv6 Relay Hops
This field allows an entry between 1 and 32 to define the maximum number of router

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English