D-Link xStack DES-3528 Series - JWAC Authentication State

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
249
Figure 8-43 JWAC User Settings window
The fields that can be configured are described below:
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
Password
Enter the password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm Password
Retype the password entered in the previous field.
VID (1-4094)
Enter a VLAN ID up to 4094.
Click the Add button to create a new entry.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
JWAC Authentication State
Users can view and delete the hosts for JWAC authentication.
To view this window, click Security > Japanese Web-based Access Control (JWAC) > JWAC Authentication
State, as shown below:
Figure 8-44 WAC Authentication State window
The fields that can be configured are described below:
Parameter Description
Port List (e.g.: 1:1,
1:5-1:10)
Use the drop-down menus to select the desired range of ports and tick the appropriate
check box(s), Authenticated, Authenticating, and Blocked.