EasyManuals Logo

D-Link xStack DES-3528 Series Reference Guide

D-Link xStack DES-3528 Series
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
145
Figure 4-89 LLDP Dot3 TLVs Settings window
The fields that can be configured are described below:
Parameter Description
Unit
Select a unit to configure.
From Port / To Port
Use the drop-down menu to select the port range to use for this configuration.
MAC / PHY
Configuration Status
This TLV optional data type indicates that the LLDP agent should transmit the
MAC/PHY configuration/status TLV. This indicates it is possible for two ends of an
IEEE 802.3 link to be configured with different duplex and/or speed settings and still
establish some limited network connectivity. More precisely, the information includes
whether the port supports the auto-negotiation function, whether the function is
enabled, whether it has auto-negotiated advertised capability, and what is the
operational MAU type. The default state is Disabled.
Link Aggregation
The Link Aggregation option indicates that LLDP agents should transmit 'Link
Aggregation TLV'. This indicates the current link aggregation status of IEEE 802.3
MACs. More precisely, the information should include whether the port is capable of
doing link aggregation, whether the port is aggregated in an aggregated link, and
what is the aggregated port ID. The default state is Disabled.
Maximum Frame Size
The Maximum Frame Size indicates that LLDP agent should transmit 'Maximum-
frame-size TLV. The default state is Disabled.
Power Via MDI
Use the drop-down menu to enable or disable power via MDI.
Click the Apply button to accept the changes made.
LLDP Statistic System
The LLDP Statistics System page allows you an overview of the neighbor detection activity, LLDP Statistics and
the settings for individual ports on the Switch. Select a Port number from the drop-down menu and click the Find
button to view statistics for a certain port.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Statistic System, as shown below:

Table of Contents

Other manuals for D-Link xStack DES-3528 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DES-3528 Series and is the answer not in the manual?

D-Link xStack DES-3528 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DES-3528 Series
CategorySwitch
LanguageEnglish

Related product manuals