xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
315
Figure 10-17 Ethernet OAM Statistics window
The fields that can be configured are described below:
Parameter Description
Unit
Use the drop-down menu to specify the unit number.
Port List
Specify which ports’ counter to show. Tick All Ports to view all ports.
Click the Clear button to clear all the information entered in the fields.
DULD Settings
The window is used to configure unidirectional link detection on ports.
Unidirectional link detection provides discovery mechanism based on 802.3ah to find its neighbor. If the discovery
can complete in the configured discovery time, it concludes the bi-directional link. Otherwise, it starts to detect the
link status.
To view this window, click OAM > DULD Settings, as shown below:
To Next Page
Loading...
