D-Link xStack DES-3528 Series Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
222
Port
Select the port to be displayed.
Click the Apply button to accept the changes made.
NOTE: The Authenticator State cannot be viewed on the Switch unless 802.1X is enabled. To
enable 802.1X, go to Security > 802.1X > 802.1X Global Settings, and select Enabled
from the Authentication State drop-down menu.
Authenticator Session Statistics
This table contains the session statistics objects for the Authenticator PAE associated with each port. An entry
appears in this table for each port that supports the Authenticator function.
To view this window, click Security > 802.1X > Authenticator Session Statistics, as shown below:
Figure 8-16 Authenticator Session Statistics window
The fields that can be configured are described below:
Parameter Description
Unit
Select the unit to be displayed.
Port
Select the port to be displayed.
Click the Apply button to accept the changes made.
NOTE: The Authenticator State cannot be viewed on the Switch unless 802.1X is enabled. To
enable 802.1X, go to Security > 802.1X > 802.1X Global Settings, and select Enabled
from the Authentication State drop-down menu.

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English