D-Link xStack DES-3528 Series - MAC Block List

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
232
Figure 8-26 IMPB Entry Settings window
The fields that can be configured are described below:
Parameter Description
IPv4 Address
Click the radio button to enter the IP address to bind to the MAC address set below.
IPv6 Address
Click the radio button to enter the IPv6 address to bind to the MAC address set below.
MAC Address
Enter the MAC address to bind to the IPv4 or IPv6 address set above.
Ports
Specify the Switch ports for which to configure this IP-MAC binding entry (IP Address +
MAC Address). Tick the All check box to configure this entry for all ports on the Switch.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
MAC Block List
This window is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > MAC Block List, as shown below:
Figure 8-27 MAC Block List window
The fields that can be configured are described below:
Parameter Description
VLAN Name
Enter a VLAN Name.
MAC Address
Enter a MAC address.
Click the Find button to find an unauthorized device that has been blocked by the IP-MAC binding restrictions
Click the View All button to display all the existing entries.