D-Link xStack DES-3528 Series - DHCP Snooping

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
233
Click the Delete All button to remove all the entries listed.
DHCP Snooping
DHCP Snooping Maximum Entry Settings
Users can configure the maximum DHCP snooping entry for ports on this page.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping
Maximum Entry Settings, as shown below:
Figure 8-28 DHCP Snooping Maximum Entry Settings window
The fields that can be configured are described below:
Parameter Description
Unit
Select a unit to configure.
From Port / To Port
Use the drop-down menus to select a range of ports to use.
Maximum Entry (1-50)
Enter the maximum entry value. Tick the No Limit check box to have unlimited
entries.
Maximum IPv6 Entry
(1-50)
Enter the maximum IPv6 entry value. Tick the No Limit check box to have unlimited
entries.
Click the Apply button to accept the changes made.
DHCP Snooping Entry
This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Entry,
as shown below: