xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
154
To view the following window, click L3 Features > IPv6 Route Table, as shown below:
Figure 5-5 IPv6 Route Table window
The fields that can be configured are described below:
Parameter Description
Network Address
Enter the IPv6 network address.
Click the Find button to locate a specific entry based on the information entered.
Policy Route Settings
This window is use to configure the policy route information.
To view the following window, click L3 Features > Policy Route Settings, as shown below:
Figure 5-6 Policy Route Settings window
The fields that can be configured are described below:
Parameter Description
Policy Route Name
Enter a name with maximum 32 characters for the policy route.
Click the Add button to add the entry.
Click the Edit button to configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Edit button to see the window as shown below.
Figure 5-7 Policy Route Settings - Edit window