xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
43
Figure 3-11 IPv6 Interface Settings – IPv6 Edit window
The fields that can be configured are described below:
Parameter Description
Interface Name
Display the IPv6 interface name.
IPv6 State
Use the drop-down menu to enable or disable IPv6 State.
Interface Admin State
Use the drop-down menu to enable or disable the Interface Admin State.
IPv6 Network Address
(e.g.: 3710::1/64)
Enter the neighbor’s global or local link address.
DHCPv6 Client
Use the drop-down menu to enable or disable the DHCPv6 client.
NS Retransmit Time (0-
4394967295)
Enter the Neighbor solicitation’s retransmit timer in millisecond here. It has the same
value as the RA retransmit time in the configuration of the IPv6 ND RA command. If
this field is configure, it will duplicate the enter into the RA field.
Automatic Link Local
Address
Use the drop-down menu to enable or disable the Automatic Link Local Address.
Click the Apply button to accept the changes made for each individual section.
Click the <<Back button to discard the changes made and return to the previous page.
Click the View All IPv6 Address link to view all the current IPv6 address.
Click the View All IPv6 Address link to see the following window.
Figure 3-12 IPv6 Interface Settings – View All IPv6 Address window
Click the <<Back button to return to the previous page.
Management Settings
Users can stop the scrolling of multiple pages beyond the limits of the console when using the Command Line
Interface.
To Next Page
Loading...
Need help?
General