xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
209
After clicking the Show Details button in the CPU Access Rule List, the following page will appear:
Figure 7-43 CPU Access Rule Detail Information (Packet Content ACL)
Click the Show All Rules button to navigate back to the CPU Access Rule List.
ACL Finder
The ACL rule finder helps you to identify any rules that have been assigned to a specific port and edit existing rules
quickly.
To view this window, click ACL > ACL Finder, as shown below:
Figure 7-44 ACL Finder window
The fields that can be configured are described below:
Parameter Description
Profile ID
Use the drop-down menu to select the Profile ID for the ACL rule finder to identify the rule.
Unit
Select the unit to configure.
Port
Enter the port number for the ACL rule finder to identify the rule.
State
Use the drop-down menu to select the state. If the state is set to Normal then it will allows
the user to find normal ACL rules. If the state is set to CPU then it allows the user to find
CPU ACL rules.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry selected.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
Need help?
General