D-Link xStack DES-3528 Series Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
306
Alarm Time (250-1000)
Enter the time period in centisecond to control the fault alarm to be sent if a defect is
reported continuously. The default value is 250.
Alarm Reset Time (250-
1000)
Enter the time period in centisecond to reset the fault alarm if a defect hasn’t been
reported since the last defect report. The default value is 1000.
Click the Apply button to accept the changes made.
Click the <<Back button to go back to the CFM MEP Settings window.
Click the Remote MEP button to detail information about remote MEP.
Click the Remote MEP button to see the following window.
Figure 10-7 CFM Remote MEP window

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English