xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
345
Figure 12-5 Stacking Information window
The Stacking Information window displays the following information:
Parameter Description
Topology
Show the current topology employed using this Switch.
My Box ID
Display the Box ID of the Switch currently in use.
Master ID
Display the Unit ID number of the Primary Master of the Switch stack.
Backup Master
Display the Unit ID of the Backup Master of the switch stack.
Box Count
Display the number of switches in the switch stack.
Box ID
Display the Switch’s order in the stack.
User Set
Box ID can be assigned automatically (Auto), or can be assigned statically. The default
is Auto.
Type
Display the model name of the corresponding switch in a stack.
Exist
Denote whether a switch does or does not exist in a stack.
Priority
Display the priority ID of the Switch. The lower the number, the higher the priority. The
box (switch) with the lowest priority number in the stack denotes the Primary Master
switch.
MAC
Display the MAC address of the corresponding switch in the switch stack.
Prom Version
Show the PROM in use for the Switch. This may be different from the values shown in
the illustration.
Runtime Version
Show the firmware version in use for the Switch. This may be different from the values
shown in the illustrations.
H/W Version
Show the hardware version in use for the Switch. This may be different from the values
shown in the illustration.
To Next Page
Loading...
