Ethernet Type. (Blue in Table 6, 13th and 14th
bytes)
The second chunk starts from Chunk 7 mask for
Sender IP in ARP packet. (Green in Table 6, 29th
and 30th bytes)
The third chunk starts from Chunk 8 mask for
Sender IP in ARP packet. (Brown in Table 6, 31st
and 32nd bytes)
Step 4:
config access_profile profile_id 2 add
access_id 1 packet_content
offset_chunk_1 0x00000806 offset_chunk_2
0x00000A5A offset_chunk_3 0x5A5A0000
port 1-12 deny
Configure access profile 2.
The rest of the ARP packets whose Sender IP claim
they are the gateway’s IP will be dropped.
Step 5:
save
Save configuration.
To Next Page
Loading...
Need help?
General