Please refer to the following contents for LAN and WAN login difference.
The window display mode and the channel number are by default. For example, for the 16-channel,
the max window split mode is 16.
For multiple-channel monitor, system adopts sub stream to monitor by default. Double click one
channel, system switches to single channel and system uses main stream to monitor. You can view
there are two icons at the left top corner of the channel number for you reference. M stands for main
stream. S stands for sub stream (extra stream).
Important
For multiple-channel monitor mode, system adopts extra stream to monitor by default. You can not
modify manually. All channels are trying to synchronize. Please note the synchronization effect still
depends on your network environments.
For bandwidth consideration, system can not support monitor and playback at the same time.
System auto closes monitor or playback interface when you are searching setup in the configuration
interface. It is to enhance search speed.
5.4 Search Human Face
On the main interface, click Face search button, you can see an interface shown as below. See
Figure 5-17.
Figure 5-17
Please refer to the following sheet for detailed information.
To Next Page
Loading...
