Figure 5-27
5.5.1.5 Channel Type
It is to set channel type. Each channel supports analog camera（analog standard definition/HDCVI）
/network camera connection. Please note DVR needs to restart to activate new setup. The network
camera connection shall begin with the last channel. For the 16-channel (or higher) series product,
please go to the next page to set.
From main window->Setup->Camera->Channel type, you can go to the following interface. See Figure
5-28.
Figure 5-28
5.5.2 Network
5.5.2.1 TCP/IP
Here is for you to set DVR IP address and DNS server so that it can connect with other devices in the
LAN.
To Next Page
Loading...
