Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
Check the box here, system can record the network event alarm log.
5.5.3.10 Alarm Output
From main menu->Setup->Event->Alarm output, it is to set alarm output mode. See Figure 5-97.
Figure 5-97
Please refer to the following sheet for detailed information.
The corresponding event triggers the alarm output or cancels alarm.
Forcedly trigger alarm output.
Forcedly cancel or close alarm output.
Here you can view alarm output port status. The alarm is enabled if the
icon is highlighted.
Click the button, you can clear all alarm output status.
5.5.4 Storage
5.5.4.1 Schedule
5.5.4.1.1 Schedule Record
From main menu->Setup->Storage->schedule, you can add or remove the schedule record setup. See
Figure 5-98.
There are five record modes: general (auto), motion detect and alarm, and intelligent. There are six
periods in one day.
You can view the current time period setup from the color bar.
Green color stands for the general record/snapshot.
To Next Page
Loading...
