Dahua HCVR82**A-S3 Series - Tour

70
Figure 4-42
4.3.9 Tour
Tour function allows you to view multiple-channel video at the specified interval on the preview window.
4.3.9.1 Tour Settings
Here you can activate tour function. Click Setup button, you can see an interface shown as in Figure
4-43.
 Enable tour: Highlight box here to enable this function.
 Screen No.: It is to select the screen you want to enable tour function.
 Interval: System supports 1/8/-window tour. Input proper interval value here. The value ranges from
5-120 seconds. It is for schedule tour/alarm/motion detect tour.
 Split: You can select window split mode from the dropdown list.
 Channel group: It is to display all channel groups on current split mode. You can edit and delete a
channel group here. Double click an item in the list; you can edit its channel group setup. Right now
system max supports 64.
 Add: Under specified window split mode, click it to add channel group.
 Delete: Click it to remove selected channel group.
 Move up: Click it to move current selected channel up.
 Move down: Click it to move current selected channel down.
 Default: Click it to restore default setup.
Tips:
 Use mouse or Shift button to switch and button to enable /disable tour. means the tour
funciton is enabled and meas tour funciton is disabled.