Dahua HCVR82**A-S3 Series - Call PTZ Functions

83
Figure 4-62
Scan Setup
In Figure 4-59, click Scan button. See Figure 4-63.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup process is
complete.
Figure 4-63
4.7.5 Call PTZ Functions
Call Preset
In Figure 4-55, input preset value and then click to call a preset. Click again to stop
call.
Call Pattern
In Figure 4-55, input pattern value and then click to call a pattern. Click again to stop
call.
Call Tour