Figure 5-155
Modify
Double click one mark information item, you can see system pops up a dialogue box for you to change
mark information. You can only change mark name here.
Delete
Here you can check the mark information item you want to delete and then click Delete button, you can
remove one mark item. .
Note
After you go to the mark management interface, system needs to pause current playback. System
resume playback after you exit mark management interface.
If the mark file you want to playback has been removed, system begins playback from the first file in
the list.
5.6.3 Splice Playback
For the large record file, you can use splice playback function to play the same file in several sections at
the same time. It is very convenient for you to find the video footages you desire.
On the main menu, select splice playback from the dropdown list, you can go to the Figure 5-156.
On the right pane, set channel, date, split mode. The splice playback interface is shown as below. Each
section has a small triangle; you can adjust it to set time.
Figure 5-156
Note
Select split mode, so that the record can be spliced in several sections.
To Next Page
Loading...
