1500: Ethernet information packet max value and it is also the default value. It is the typical
setup when there is no PPPoE or VPN. It is the default setup of some router, switch or the
network adapter.
1492: Recommend value for PPPoE.
1468: Recommend value for DHCP.
Preferred DNS server: DNS server IP address.
Alternate DNS server: DNS server alternate address.
Figure 4-11
4.2.3 P2P
Tips:
From main menu->Setting->Network->P2P, you can also go to the following interface.
Click Next button, you can set P2P function. See Figure 4-12.
You can add a device via the client on the cellphone or the platform.
You can use your cell phone to scan the QR code and add it to the cell phone client.
Go to the P2P management platform, via the SN from scanning the QR code, you can access the
device in the WAN. Please refer to the P2P operation manual included in the resources CD.
To Next Page
Loading...
