Username: 888888. Password: 888888. (administrator, local only)
Username: default. Password: default (hidden user). Hidden user “default” is for system interior use
only and can not be deleted. When there is no login user, hidden user “default” automatically login.
You can set some rights such as monitor for this user so that you can view some channel view
without login.
Figure 4-6
Caution
Please reboot the device or wait for 30 minutes if your account has been locked. You can go to main
menu->Setting->Event->Abnormality->User->Illegal login to set customized account lock time.
After input corresponding user name and password, you can click OK button. System goes to the startup
wizard.
4.2.1 General
Tips:
From main menu->Setting->System->General, you can also go to the following interface.
4.2.1.1 General
Click OK button, you can go to General interface. See Figure 4-7.
Device ID: Please input a corresponding device name here.
Device No: Here you can set device number.
Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English,
Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybe
found in various series.)
Video standard: There are two formats: NTSC and PAL.
HDD full: Here is for you to select working mode when hard disk is full. There are two options: stop
recording or rewrite. If current working HDD is overwritten or the current HDD is full while the next
HDD is no empty, then system stops recording, If the current HDD is full and then next HDD is not
empty, then system overwrites the previous files. Please note, DVR will not overwrite the locked files.
Please refer to chapter 4.10.8 to lock or unlock a file.
Pack duration: Here is for you to specify record duration. There are two ways for you to set.
To Next Page
Loading...
Need help?
General