The file will be saved at the path you set in chaptet 5.5.1.3.4 (main
menu->Setup->Camera->Encode->Path).
Note
Clip function is for one-channel/multiple-channel.
Max save 1024 files at the same time.
5.6.2 Mark Playback
Please make sure your purchased device support this function. You can use this function only if
you can see the mark playback icon on the Search interface.
When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is
very easy for you to get the important video information.
Add Mark
When system is playback, click Mark button , you can go to the following interface. See Figure 5-153.
Figure 5-153
Input a name and then click OK button. You can view current file in the mark file list.
Playback Mark
During 1-window playback mode, click Mark file list button, you can go to mark file list interface. Double
click one mark file, you can begin playback from the mark time. See Figure 5-154.
To Next Page
Loading...
