Please refer to the following sheet for detailed information.
Check Preview or Monitor first.
Click Set button, you can privacy mask the specified video in the
preview or monitor video.
System max supports 4 privacy mask zones.
You can enable this function so that system overlays time
information in video window.
You can use the mouse to drag the time title position.
You can view time title on the live video of the WEB or the
playback video.
You can enable this function so that system overlays channel
information in video window.
You can use the mouse to drag the channel title position.
You can view channel title on the live video of the WEB or the
playback video.
5.5.1.3.4 Path
From main window->Setup->Camera->Encode->Path, the storage path interface is shown as in Figure
5-26.
Here you can set snap image saved path ( in the preview interface) and the record storage path
( in the preview interface).The default setup is C:\PictureDownload and C:\RecordDownload.
Please click the Save button to save current setup.
Figure 5-26
5.5.1.4 Channel Name
From main window->Setup->Camera->Camera name, here you can set channel name. See Figure 5-27.
Please note this function is for analog channel only. The offline digital channel name here is read-only.
To Next Page
Loading...
