Figure 5-24
Please refer to the following sheet for detailed information.
There are two modes: Regular (schedule) and Trigger.
Regular snapshot is valid during the specified period you
set.
Trigger snapshot only is valid when motion detect alarm,
tampering alarm or local activation alarm occurs.
It is the same with the resolution of the main stream.
It is to set the image quality. There are six levels.
It is to set snapshot frequency. The value ranges from 1s to 7s.
Or you can set customized value. The max setup is
3600s/picture.
Click it; you can copy current channel setup to other channel(s).
5.5.1.3.3 Video Overlay
From main window->Setup->Camera->Encode->Overlay, the video overlay interface is shown as in
Figure 5-25.
Figure 5-25
To Next Page
Loading...
