To Next Page

To Previous Page

cover.

bracket. Use four screws to

fix HDD.

○

4 Connect the other end of

the HDD cable to the

mainboard.

○

5 Connect the power cable

to the HDD.

○

6 Put the cover back and fix the

screws to secure firmly.

3.3.2.3 The general 2U Series

The 2U series includes HCVR88XXS-S3.

This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.

① Loosen the screws of the

upper cover and side panel.

Remove the cover.

② Fix the HDD(s) on the

bracket. Remove the top

bracket if you want to install

HDD to the bottom bracket.

③Connect the one end of the HDD

cable to the HDD.

④ Connect the other end of the

HDD cable to the mainboard.

⑤Connect the power cable to the

HDD.

⑥Put the cover back and fix the

screws to secure firmly.

Important:

If the HDD amount is less than four, you do not need to install the HDD bracket.

When there is a bracket, please make sure the installation direction of HDDs is the same.

3.3.2.4 The Removable Front Panel 2U Series

Dahua HCVR82**A-S3 Series User Manual

Questions and Answers: