Figure 4-28
Figure 4-29
4.2.6.1 Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1, click Copy
button, you can go to interface Figure 4-85. You can see current channel name is grey such as channel 1.
Now you can select the channel you want to paste such as channel 5/6/7. If you want to save current
setup of channel 1 to all channels, you can click the first box “ALL”. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy function succeeded.
Figure 4-30
4.2.6.2 Redundancy
Redundancy function allows you to memorize record file in several disks. When there is file damage
occurred in one disk, there is a spare one in the other disk. You can use this function to maintain data
reliability and safety.
In the main menu, from Setting->Storage-> Schedule, you can highlight redundancy button to
enable this function.
In the main menu, from Main menu->Setting->Storage->HDD Manager, you can set one or more
disk(s) as redundant. You can select from the dropdown list. System auto overwrites old files
once hard disk is full.
Please note only read/write disk or read-only disk can backup file and support file search function, so
you need to set at least one read-write disk otherwise you can not record video.
To Next Page
Loading...
